Convert-A-Ball System
The Original Convert-A-Ball® system designed for customers with multiple trailers. Easily switch between three standard ball sizes with out removing the shank and without tools. |
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
Home Convert-A-Ball System
Convert-A-Ball System
Original Convert-A-Ball® System
The Original Convert-A-Ball® system has three industry standard sized towing balls 1-7/8", 2" and 2-5/16". Each ball has a patented NON-REMOVABLE pin that with a push of a finger or regular screwdriver comes out of the shank and pops right off, but is 100% totally secure while towing! With the trailer coupler on the ball and shank there is no where for the pin to go and disengage from the shank. It cannot unlocked or untwist. When you are not towing, you will never lose then pin because it is designed NOT to fall out of the ball itself.
The basic Convert-A-Ball® system shank comes to fit in either a 3/4" hole or a 1" hole in your bumper or ball mount. Each shank comes with a lock washer and nut. All our shanks are rated Class 4, V-5 and meets SAE standard J-684.
When not actually towing with your Convert-A-Ball® set, it is recommended that you remove the ball and cover the shank. This helps prevent unnecessary weathering or accidental damage of the parts. Convert-A-Ball has several storage options to help make your system the last towing accessory you will every need to buy.
© Copyright 2010, All Rights Reserved